2022 Latest Design Tightening Torsion Spring On Garage Door - 1 3/4” Universal Garage Door Torsion Spring Cones – Wangxia

Product Detail

Material: Aluminium alloy
Inside diameter :1 3/4’, 2’, 2 5/8’, 3 3/4’, 5 1/4’, 6’
Product name :Garage Door Torsion Spring Cones/
For use with 1″ tube shaft.
Maximum torque generated by spring: 569in-lbs
Maximum wire size: .295″ diameter
Two pieces set
Manufacturer warranty: 3 years
Package: Carton boxes

Available Options

1 3/4” Universal Stationary Spring Cone
1 3/4” Universal Black Winding Spring Cone L
1 3/4” Universal Red Winding Spring Cone R

Features

Cones for 1-3/4 inner diameter garage door springs
One winding cone and one stationary cone on each torsion spring
Allows tension to be added and retained
Winding cones work with winding bars

Stationary cones mount to an anchor bracket
We offer Winding and Stationary Cones in sets, or assembled to our Springs. Winding Cones fit into torsion springs to permit winding and tension adjustment. Stationary Cones fit into the end of a torsion spring permitting the spring to be fixed to the center bearing bracket, and may also incorporate a retainer for a ball bearing or a nylon bushing.

To handle the installation, use your hand to turn each spring onto the cone. The fourth, fifth, sixth and seventh coils should be gripped from each each end using large channel locks or a pipe wrench. This will require you to make adjustments to the pipe wrench a couple of times so you can get an accurate grip on the spring.
Using your thumb, press the spring down into the jaws of the wrench. Rest the wrench’s other end on the door’s top. Using a winding bar, pull the winding cone down. The bar should be reinserted and the winding cone should be pulled down on until the cone is all the way in the spring’s end.